IN THIS LESSON

Boost your security with automation

Ajax scenarios are the automation of protection and comfort at the same time. They help to make the security system go beyond just the threats resisting and take being at home, in the office, and at work to a new level.

Automate the smart home with scenarios. Rest assured that every command will be delivered to the hub and executed thanks to a reliable Jeweller, Wings, and Fibra connection and the rigorous operation of OS Malevich.

Alarm reactions / Security mode change reactions / Scheduled actions / Scenarios for comfort

Hubs support the following scenario types:²

by alarm

by schedule

by humidity

by temperature

by CO2 concentration

by pressing Button

by touching LightSwitch

by arming / disarming

Learn about the most common automation scenarios:

Automatic doors and roller shutters

Situations like the staff forgetting to close a roller shutter or lock a door are now completely excluded. Set up scenarios to activate electric locks and roller shutters automatically as the user arms the system or by schedule.

Arming - Relay Jeweller - Electric lock / Schedule - WallSwitch Jeweller - Roller shutter

Cutting off the power after a fire alarm

Fire detectors immediately respond to smoke or temperature increase. Set a scenario to switch off the potential cause of ignition.

Smoke - FireProtect 2 - WallSwitch Jeweller

Water leak prevention

Ajax water leak detectors identify a pipe breakage, boiler, washing machine, or dishwasher leaking immediately. An activated scenario can automatically shut down running water to prevent flooding.

Water leak - LeaksProtect Jeweller - WaterStop Jeweller

Scheduled light control

Automation scenarios allow switching on the lights by schedule when disarming the security system or by an alarm to see intruders better and deter them. Also, you can configure the system so that the activation of one switch triggers all the switches on-site. Thus, one move turns off the lights in the entire facility.

Schedule - LightSwitch - Lights on / Alarm - LightSwitch - Lights off

Scheduled Night Mode

Night Mode arms both the property perimeter and the street. This is the optimal solution for the residential sector and business. Adjust automatic disarming to avoid unnecessary disturbance and false emergency call-outs.

Spotlighting

Use scenarios to turn on projectors if outdoor motion detectors are activated. The bright lights and loud sirens reliably protect against burglars approaching the house.

MotionProtect Outdoor Jeweller - WallSwitch Jeweller - Outdoor lighting

Heating on schedule

Save money on heating with Ajax scenarios. Adjusting the underfloor heating schedule and turning on the electric boiler automatically at night — when tariffs are lower.¹

Schedule - WallSwitch Jeweller - Heating

Automated ventilation

Avoid the high CO2 concentration impact on productivity. Scenarios activate ventilation and restore air quality.

CO2 - LifeQuality Jeweller - Relay Jeweller - Ventilation

Home activity simulation

When planning a vacation, the user can easily set up a schedule to simulate home activity with lights and audio system sounds. That way, the house won't look empty and attract the attention of the burglars.

Schedule - WallSwitch Jeweller - Lighting / Schedule - Socket - Audio system

The amount of alarm reactions, Button commands, or scheduled actions depends on the hub model.³

5 scenarios

Hub Jeweller

64 scenarios

Hub Plus Jeweller

Hub 2 Plus Jeweller

32 scenarios

Hub 2 (2G)

Hub Hybrid (2G)

Hub 2 (4G)

Hub Hybrid (4G)

Set up a scenario in 2 minutes:

1 - Open the Ajax app

2 - Open the settings of an automation device, a hub, or Button

3 - Choose a scenario type and set up the execution conditions

Take a closer look: Ajax Comfort and Productivity products

¹— Electricity rates may vary depending on your country and region.

² — The Hub control panel does not support temperature scenarios.

³ — Reactions by arming and disarming are not included in the overall limit of the hub’s scenarios. You can run only one reaction by arming and disarming per automation device.